Title: How to Setup Scorebot
Equipment: Scorebot
Introduction: Brief setup of setting up Scorebot
Step 1: Verify that the scoring provider has data output from the device (ex. AllSport 5000/DB9 Ports)
Step 2: Plug Scorebot into an ethernet port that is configured for our VLAN (if not configured for VLAN, each out to on-site IT).
Step 3: For testing purposes, add 6 runs to the home team, 5 for visitors, 3-2 count, and 2 outs if testing baseball data. after confirming these values work, confirm the inning arrow and inning change.
Step 4: Go to Flowics and verify that the Scorebot unit is sending data (use personal test page and configure bot number)
Step 5: If unable to verify scoring, download Scorelink 3 (or the latest version) to be able to configure the Scorebot
https://helpdesk.geniussports.com/hc/requests/41417
Daktronics is usually 1600 Baseball unless specified by Scorebot Rep.
If pulling from DSTI or Allsport CG do Allsport CG Baseball
If using OES make sure its Baseball code 3
Some teams do have an All american 9000. Should be under Baseball for MILB
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article